Modelo: Q350
Outline size | ||
L: 3550mm | W: 900mm | |
H: 1630mm | Machine weight: 8200kg | |
| ||
Max.swing diameter on the bed 1000mm | Diameter of pipe 114-350 | |
Max.outside diameter of pipe 1000-6000mm | Max. taper 1:4 | |
Tails quill diameter 930mm | ||
Spindle | ||
Spindle bore 350mm | Level of spindle speed 9 | |
Range of spindle speed foreward 6.6-198r /min | Reversal 13.5-200.9r/min | |
Feed system | ||
Vertical and horizontal feed species 32 | ||
Thus feed range | ||
Processing metric thread number 24 | Transverse 0.04-0.72mm | |
Inch thread processing number 24 | Longitudinal0.1-1.44mm | |
Pitch processing metric thread 1-15mm | ||
Inch thread processing pitch 1-15t.p.i | ||
Saddle longitudinal moving speed 4m/min | ||
The slide board box handwheel rotates a saddle longitudinal travel 1mm | ||
Tool carrier | | |
The surface of the knife section size 30×30mm | | |
The knife frame dial rotates every one stroke of knife 0.05mm | ||
The lower sliding plate dial rotates one grid knife stroke 0.1mm | ||
Spindle center line to the tool installation datum vertical distance 33mm | ||
The tailstock | ||
Top sleeve diameter 100mm | Top sleeve travel 250mm | |
Top sleevetaper Morse6 | Tailstock lateral movement amount ±15mm | |
The top taper Morse6 | ||
The power part | ||
Gear pump belt 1-A800 | Rapid motor NY80-4 1.1KW 1350r/min 380v | |
The main motorbelt B1727 | Clamping motor YXZ90-L-4 1.5KW 1400r/min 380v | |
Gear pump CB-B6 2.5Mpa 1450r/min | The main motor Y180M-4 18.5KW 1470r/min 380v |
Grupos de Producto : Torno de roscado de tubos