Modelo: Q500
Outline size | ||
L: 5000mm | W: 2100mm | |
H: 1892mm | Machine weight: 10000Kg | |
Max.swing diameter on the bed 800mm | Diameter of pipe 280-508 | |
Max.outside diameter of pipe 1000-6000mm | Max. taper 1:4 | |
Tails quill diameter 930mm | ||
Spindle | ||
Spindle bore 515mm | Level of spindle speed 9 | |
Range of spindle speed 4.9-180r/min | | |
Feed system | ||
Vertical and horizontal feed species 32 | ||
Thus feed range | ||
Processing metric thread number 32 | Transverse 0.06-0.89mm | |
Inch thread processing number 31 | Longitudinal0.36-5.36mm | |
Pitch processing metric thread 1-15mm | ||
Inch thread processing pitch 2-30t.p.i | ||
Saddle longitudinal moving speed 2.5m/min | ||
The slide board box handwheel rotates a saddle longitudinal travel 1mm | ||
Tool carrier | | |
The knife frame maximum stroke 210mm | The surface of the knife section size 30×30mm | |
The cutter turntable rotation angle ±90° | | |
The knife frame dial rotates every one stroke of knife 0.05mm | ||
The lower sliding plate dial rotates one grid knife stroke 0.05mm | ||
Spindle center line to the tool installation datum vertical distance 53mm | ||
The tailstock | ||
Top sleeve diameter 140mm | Top sleeve travel 360mm | |
Top sleevetaper Morse6 | Tailstock lateral movement amount ±15mm | |
The top taper Morse6 | ||
The power part | ||
Gear pump belt CB-B6 | Rapid motor JCO2-21-23 1.5kw 2850r/MIN 380v | |
The main motor belt B1700 | Clamping motor yxz90-l-4 1.5KW 1400r/min 380v | |
Gear pump CB-B6 2.5Mpa 1450r/min | The main motor y180l-4-b3 22kw 1470r/min |
Grupos de Producto : Torno de roscado de tubos