Modelo: Q1327
Outline size | ||
L: 3553mm | W: 1450mm | |
H: 1505mm | Machine weight: 5300kg | |
| ||
Max.swing diameter on the bed 800mm | Diameter of pipe 70-273 | |
Max.outside diameter of pipe 1000mm | Max. taper 1:4 | |
Tails quill diameter 930mm | ||
Spindle | ||
Spindle bore 280mm | Level of spindle speed 9 | |
Range of spindle speed 7.7-230r/min | | |
Feed system | ||
Vertical and horizontal feed species 18 | ||
Thus feed range | ||
Processing metric thread number 4 | Transverse 0.04-0.65mm | |
Inch thread processing number 6 | Longitudinal0.1-1.46mm | |
Pitch processing metric thread 2,3,4,6mm | ||
Inch thread processing pitch 4,5,6,8,10,12t.p.i | ||
Saddle longitudinal moving speed 2.5m/min | ||
The slide board box handwheel rotates a saddle longitudinal travel 0.20mm | ||
Tool carrier | | |
The knife frame maximum stroke 210mm | The surface of the knife section size 30×30mm | |
The cutter turntable rotation angle ±90° | | |
The knife frame dial rotates every one stroke of knife 0.05mm | ||
The lower sliding plate dial rotates one grid knife stroke 0.1mm | ||
Spindle center line to the tool installation datum vertical distance 33mm | ||
The tailstock | ||
Top sleeve diameter 100mm | Top sleeve travel 250mm | |
Top sleevetaper Morse6 | Tailstock lateral movement amount ±15mm | |
The top taper Morse6 | ||
The power part | ||
Gear pump belt 1-A800 | Rapid motor 2A0S5632 0.37KW 2700r/min | |
The main motor belt B1854 | Clamping motor 1.5KW2860r/min | |
Gear pump CB-B6 2.5Mpa 1450r/min | The main motor 15KW 1460r/min |
Grupos de Producto : Torno de roscado de tubos